After my 1st solo cross country, I headed out of town for a conference and then a week vacation. When I returned, it was time to get back in the plane. I had planned a flight to Raliegh Exec Jetport (KTTA) a few weeks earlier, so I just needed to update the winds and weather. Friday morning, June 22nd looked good, so I arrived at the airport at 8 a.m.
I preflighted 69R, climbed in and started her up. I spent at least 7 minutes plugging in all my com frequencies and setting up the GPS. Finally I was ready to taxi and headed to Runway 6 to take off.
After the run-up was completed, along with "Lights, Camera, Action" I took off, exited the pattern at 45* climbed to 2000 and made my turn toward KTTA. I called Raliegh Radio and opened my flight plan, and then called Greensboro approach for VFR Flight Following. No problems with either.
I picked up my first check point and began looking for checkpoint 2. I was at 3500 feet and the air was not as clear as during my first cross country. It was quite hazy though visibility was 10sm+.'
The trip was uneventful, but I began my descent to KTTA too late. I was waiting to get a word in edgwise with Raliegh approach; By the time I did, I was still at 3500 10nm out. (I have since learned that flying VFR, I could have begun my descent when I wanted to.)
I was descending at 1000 ft/m, and ended up over the field at 2500 feet. Pattern is 1200. There were a lot of planes in the pattern, one fairly close in front of me on the downwind for Runway 21. I swung wide to give him room and then turned on the left down wind for 21. Every time I made a call announcing my position, the guy in the plane in front of me would make a comment: "Remember, you are number 2" This happened when I turned base, and final. He was back in the air after his touch and go long before my wheels touched down. I taxied to parking and went in the FBO to get a soda and rest for awhile.
So here is the incident that prompted me to post a question on "AskaCFI.com." I departed Runway 21, and was climbing straight out. I climbed through pattern altitude (1200) and passed the end of the runway. As I passed through 1500 about a mile past the airport, I initiated a turn to the east. Over the CTAF I heard, "Be Advised...Aircraft making a non-standard departure."
According to the Pilot’s Handbook of Aeronautical Knowledge 13-11, one should "depart the pattern at either a 45* left (or 45* right with a right pattern) or straight out." Was I in error? As best I have been able to figure out: once above pattern altitude and beyond the departure end of the runway, you are clear of the pattern. I suppose I could have exited on the 45* and made a big looping turn to the east. I probably will next time.
Anyway, my trip home was uneventful, and I was excited to have this cross country completed!
My confidence in my flying and navigating skills is increasing. A good thing!